Avery Dennison Monarch 9493 SNP Administrator's Manual page 32

Setting the IP Address
This option sets the printer's IP address.
From the Network Configure menu, select IP Address.
1.
Press D or U to increase or decrease the highlighted number. Press L
2.
or R to highlight a different number.
3. When you are finished, press R until you see e. Then press e to save
the address and return to the Configure menu. Press X to exit without
saving changes.
Setting the Subnet Mask
This option sets the printer's subnet mask.
From the Network Configure menu, select Subnet Mask.
1.
Press D or U to increase or decrease the highlighted number. Press L
2.
or R to highlight a different number.
3. When you are finished, press R until you see e. Then press e to save
the address and return to the Configure menu. Press X to exit without
saving changes.
2-20 System Administrator's Guide