Avery Dennison Monarch 9493 SNP Administrator's Manual page 24

Setting the Protocol
This option sets the protocol.
1. From the Configure menu, select Protocol: TCP or LPD.
Protocol
TCP
X LPD
E U
Use D to select the protocol you want. For example, if you select LPD,
2.
you must specify a raw printer port:
Port
+ 09100
E U
Use A as shown in the following table:
E
Press A to
Saves the setting
Press E to save the setting. You return to the Configure menu.
3.
2-12 System Administrator's Guide
D
+
R
Press A to
Scrolls through the
positions from left to right
+
Press A to
Toggles between + or –;
also
increments the current
position setting by 1