Configuring The 802.11B/G And Ip Settings; Configuring The Print Server - Avery Dennison Monarch 9493 SNP Administrator's Manual

C O N F I G U R I N G T H E 8 0 2 . 1 1 B / G
A N D I P S E T T I N G S
C o n f i g u r i n g t h e P r i n t S e r v e r
To configure the print server for an 802.11b/g wireless network, you must set
the wireless mode (Ad-Hoc or infrastructure), SSID, channel (Ad-Hoc mode
only), data rate and security. All nodes of a wireless network need to have
the same settings to communicate with each other.
There are several ways to configure your print server. You can
♦ send console commands using a utility such as Monarch® NetManager.
See "Installing the Software" for NetManager information.
♦ use a Web browser. See Chapter 4, "Using a Web Browser" for more
information.
♦ use the Sierra Sport Configurator with Avalanche. See Chapter 5, "Using
the Sierra Sport Configurator" for more information.
♦ use Telnet. See Chapter 6, "Telnet Console Commands" for a list of
supported commands.
♦ select the RF Network (9460) and Network (9493) printer menus. See
"Setting Up Using the Printer's Menu." The printer's menus allow you to
do basic setup.

Configuring the 802.11b/g and IP Settings 2-1

2