Checking The Status - Avery Dennison Monarch 9460 SNP System Administrator Manual

5. Press the navigational buttons in this order: Left, Left, Left, Right, and Left.
Diagnostics
Online Diag.
E D
6. Press D until Setup is highlighted.
Setup
Service
E U
7. Press E to select Setup.
8. From the Setup menu, press D until you see RF Network. Press E to select RF
Network.
The RF Network menu allows you to check the printer's status, configure the RF network
settings, print RF settings, and reset the radio.
To exit, press F at any time.

Checking the Status

This option displays the status of the RF network.
1. From the RF Network menu, select Status.
192.0.0.192
1.0
(2006.11.20)
PXR1E858F
The local IP address, firmware version, printer model, board revision, and device
name are displayed.
2. Press A to see the next screen of information.
E
0040171 858F
Protocol: TCP
State: Wait
Radio: IEEE 802.11g
The MAC address, protocol, current state, and radio type are displayed.
3. Press any A to return to the RF Network menu.
D
Configuring the 802.11b/g and IP Settings 2-5