Checking The Versions; Checking Supply Quality - Avery Dennison ADTP1 System Administrator Manual

C h e c k i n g t h e V e r s i o n s
View the version number of the printer's firmware, RFID module's firmware, and RFID
inlay database. The printer's serial number is also viewable.
Select
Firmware
Serial Number
Board ID
Wireless
RFID 1
RFID 2
Easy Setup
C h e c k i n g S u p p l y Q u a l i t y
The printer continuously stores data from 16 of the most recently printed supplies to
check the reflectivity of the sense marks on the supply. Before you check your supply
quality, print a batch of supplies or test labels.
Select
Supply Quality
10-2 System Administrator's Guide
To
View the printer's firmware version.
View the printer's serial number.
View the control board's revision level.
View the Wireless module type.
View the RFID module's version. This is the optional encoder.
View the RFID module's version. This is the optional external
reader.
View the database version number for the RFID inlay database,
d46ESXX.db. Check our web site for updates. See
RFID Inlay Database" for more information
To
View the supply quality.
The message "No data!" appears if you have not printed any labels.
Press  or  to display the readings.
Len The length of the loaded supply in dots.
Max Should always be greater than Min listing.
OK Did the sense mark pass the detection test? Y or N
Classification: Avery Dennison - Public
"Updating the