Using The Battery; Charging The Battery; Inserting And Removing The Battery; Checking The Battery Status - Avery Dennison Pathfinder 6140 Equipment Manual

U s i n g t h e B a t t e r y
The printer's power source is a 7.4V lithium-ion battery.
The printer uses only this battery; do not substitute batteries.
Note:
Charge the battery when you receive the printer, even if you do not plan to use it right away.

Charging the Battery

To charge the battery, use one of the Monarch® chargers listed in
Accessories". Refer to the documentation provided with the chargers for more information.
Charging time is approximately 1 – 3 hours.
The battery must be charged using only the chargers listed in this manual; the
Warning:
battery might explode if placed on a different charger.

Inserting and Removing the Battery

Review the Battery Safety Information
1. Push the battery door release button to open the battery compartment.
2. Insert or remove the battery as shown.

Checking the Battery Status

The printer easily provides the status of the battery.
1. Turn on the printer.
2. The Battery Indicator light shows battery status.
1-2 Equipment Manual
and then follow the steps below:
Batter y Indicator
Pow er Button
Appendix A, "Specifications &