Specifi Cations - Intermec EasyCoder 501 Service Manual

Chapter 1 Models and Options
1.2 Specifi cations
COMMON STANDARD FEATURES:
Smooth Fonts
Print Directions
Display
Dimensions (W x D x H) excl. cutter
Weight (excl. media, ribbon, and options)
Ambient Operating Temperature (printer)
Humidity (printer)
Micro processor
Firmware
On-Board RAM Memory, Standard/Maximum
Label and Ribbon End Sensors
Input Voltage
Max. Power Consumption
Sound Emission Level
Communications Interface, Standard
DIFFERENT STANDARD FEATURES:
Print Technique
Print Resolution (dots/mm)
Print Resolution (dotsinch)
Maximum Print Width (8 dots per mm)
Maximum Print Width (11.81 dots per mm)
Maximum Print Speed
Maximum Media Width
Maximum Print Length (8 dots per mm)
Maximum Print Length (11.81 dots per mm)
Max. Internal Media Roll Diameter
Maximum Ribbon Length
Label Slack Absorber
Keyboard, Built-In
Bitmap Fonts, Expandible 4 Times
Bar Code Generators
Startup Program
COMMON OPTIONS:
Parallel Interface Board 2
3
Centronics Cable
RS-232 Cable 3
2
Memory Card Adapter
External R232 Alphanumeric Keyboard
Clear Door Panel, for View of Label Roll
OPTIONS FOR DIFFERENT MODELS:
Serial Interface Board 2
2
RS485 Interface Board
Industrial Interface Board 2
2
Paper Cutter (standard)
Paper Cutter 2 (LinerLess)
1
Integral Liner/Batch Takeup Unit
Label Roll Retainer 3
Real Time Clock (RTC) 2
2
Label Taken Sensor
Media and Ribbon Low Sensors 1
1
Ribbon Save Device
Scaleable Fonts Kit 2
N/A = Not Available
1 /. Factory-installed only.
2
/. Field-installable kit or factory installed.
3
/. Field-installable kit only.
14
The table below illustrates the similarities and differences between
the four main models of the EasyCoder 501.
EasyCoder 501 S
DT/TTR
8 or 11.81
203.2 or 300
104 mm (4.09 in)
108.3 mm (4.26 in)
100 mm/s (4 inch/s)
120 mm (4.7 in)
1250 mm (49.2 in)
833 mm (32.8 in)
205 mm (8.0 in)
450 m (1476 ft)
N/A
Print Key Only
Min. 1, Std. 10
Depends on F/W version
Shell v4.01 Standard
EasyCoder 501 S
Optional
Optional
Optional
Optional
3 Optional
2
Optional
EasyCoder 501 S
N/A
N/A
N/A
Optional
N/A
Optional
Optional
N/A
N/A
N/A
N/A
Optional
All
Yes, with Scaleable Fonts Kit
4
2 line x 16 characters, LCD
275 x 481.5 x 239 mm (10.8 x 19.0 x 9.4 in)
15.0 kg (33 lbs)
+5˚C to +40˚C (+41˚F to +104˚F)
20 to 80% non-condensing
32 bit
Intermec Fingerprint v6.14 (incl. Intermec Direct Protocol)
512 kbytes/2 Mbytes
Yes
115/230 VAC (+10%/-15%), 2.6/1.3 A, 60/50 Hz (Selected using a switch)
300 W
< 60 dB (A)
1 x RS-232; prepared for RS-422 or 20 mA Current Loop
EasyCoder 501 E
DT/TTR
8 or 11.81
203.2 or 300
104 mm (4.09 in)
108.3 mm (4.26 in)
100-200 mm/s (4-8 inch/s)
120 mm (4.7 in)
1250 mm (49.2 in)
833 mm (32.8 in)
205 mm (8.0 in)
450 m (1476 ft)
Standard
22 Programmable Keys
Min. 1, Std. 10
Depends on F/W version
Shell v4.01 Enhanced
EasyCoder 501 E
Optional
Optional
Optional
Optional
Optional
Optional
EasyCoder 501 E
Optional
Optional
Optional
Optional
N/A
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Intermec EasyCoder 501 – Service Manual Ed. 7
EasyCoder 501 SA EasyCoder 501 LL
DT/TTR DT and LinerLess
8 or 11.81
203.2 or 300
104 mm (4.09 in) 104 mm (4.09 in)
108.3 mm (4.26 in)
100-200 mm/s (4-8 inch/s) 100-150 mm/s (4-6 inch/s)
120 mm (4.7 in) 114 mm (4.49 in)
1250 mm (49.2 in) 1250 mm (49.2 in)
833 mm (32.8 in)
205 mm (8.0 in) 205 mm (8.0 in)
450 m (1476 ft)
Standard
QWERTY w. control keys 22 Programmable Keys
10 Min. 1, Std. 10
10 Depends on F/W version
Intermec Stand-Alone Shell v4.01 Enhanced
EasyCoder 501 SA EasyCoder 501 LinerLess
Optional
Optional
Optional
Optional
Optional
Optional
EasyCoder 501 SA EasyCoder 501 LinerLess
Optional
Optional
Optional
Optional
N/A
Optional
Optional
Standard
Optional
Optional
Optional
N/A
8
203.2
N/A
N/A
N/A
Standard
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
N/A
Optional
N/A
N/A
Optional
Optional
N/A
N/A
Optional