Intermec EasyCoder 501 Service Manual page 5

Chapter 0 Introduction
0.1 Contents, cont.
26. Trouble Shooting, cont.
Appendix 1
Appendix 2
Information in this manual is subject to change without prior notice and does not represent a commit-
ment on the part of Intermec Printer AB.
© Copyright Intermec Printer AB, 2001. All rights reserved. Published in Sweden.
EasyCoder, EasyLAN, Fingerprint, and LabelShop are registered trademarks of Intermec Technologies
Corp. The word Intermec, the Intermec logo, InterDriver, and PrintSet are trademarks of Intermec Tech-
nologies Corp.
Bitstream is a registered trademark of Bitstream, Inc.
Centronics is a registered trademark of Genicom Corp.
Crosstalk and DCA are registered trademarks of Digital Communications Associates, Inc.
HyperTerminal is a trademark of Hilgraeve, Inc.
IBM is a registered trademark of International Business Machines Corporation.
Intel is a registered trademark of Intel Corporation.
Macintosh and TrueType are registered trademarks of Apple Computer, Inc.
Microsoft, MS, and MS-DOS are registered trademarks of Microsoft Corporation.
TrueDoc is a trademark of Bitstream, Inc.
Unicode is a trademark of Unicode Inc.
UNIX is a registered trademark of The Open Group in the United States and other countries.
Windows is a registered trademark of Microsoft Corporation.
4
26.6 Ribbon Save Device Troubles.............................................................. 213
- No transfer ribbon is saved ................................................................ 213
- Transfer ribbon is not properly rewound .......................................... 213
- Jammed receiving face materials ...................................................... 214
- Ribbon gets wrinkled or bad printout ............................................... 214
26.7 LTS Troubles......................................................................................... 215
26.8 Real-Time Clock Troubles................................................................... 215
26.9 Standard Cutter Troubles ..................................................................... 216
26.10 LinerLess Cutter Troubles.................................................................... 217
26.11 Memory Card Adapter Troubles.......................................................... 218
26.12 Sensor Kit Troubles.............................................................................. 219
26.13 Serial Interface Board Troubles ........................................................... 219
26.14 RS-422/485 Interface Board Troubles ................................................ 219
26.15 Parallel Interface Board Troubles ........................................................ 220
26.16 Industrial Interface Board Troubles..................................................... 220
Diagrams:
Intermec Shell 4.01 Standard ........................................................................... 221
Intermec Shell 4.01 Enhanced ......................................................................... 222
EasyCoder 501 S: Setup Overview.................................................................. 223
EasyCoder 501 E, SA, & LL: Setup Mode Overview, Part 1........................ 224
EasyCoder 501 E, SA, & LL: Setup Mode Overview, Part 2........................ 225
Measuring the Break Torque............................................................................ 226
Intermec EasyCoder 501 - Service Manual Ed. 7