Easycoder Pc41 Specifications - Intermec EasyCoder PC41 Service Manual

Chapter 1—Models and Options
1.3 EasyCoder PC41 Specifications
Printing
Print Technique
Printhead Resolution
Print Speed (selectable)
Print Width (max) at 203.2 dpi
Print Length (min/max) at 203.2 dpi 6.35/472.5 mm (0.25/18.6 inches)
Media Width (min/max)
Media Thickness (min)
Media Thickness, rolls (max)
Media Thickness, fan-folds (max)
Media Roll Diameter (max)
Media Roll Core Diameter
Ribbon Width (min/max)
Ribbon Roll Diameter, Outer (max)
Ribbor Roll Core Diameter, Inner
Print Directions
Modes of Operation
Tear Off (Straight-through)
Peel Off (Self-strip)
Cut-off
Firmware
Operating System
Fonts
Font Magnification
Built-in Bar Code Symbologies
Physical Measures
Dimensions (W × L × H)
Weight (excluding PSU and media)
Ambient Operating Temperature
Ambient Storage Temperature
Humidity
Electronics
Microprocessor
On-board EPROM memory
On-board DRAM memory
Power Supply Unit
Input Voltage
Output Voltage
Input Voltage (mobile applications)
4
Thermal Transfer or Direct Thermal
203.2 dpi (8 dots/mm)
50, 75 or 100 mm/sec.
(2, 3 or 4 in/sec.)
104 mm (4.1 inches)
25.4 to 116 mm (1.00 to 4.57 inches)
0.06 mm (0.003 inches)
0.15 mm (0.006 inches)
0.17 mm (0.006 inches)
125 mm (5.0 inches)
25.4 or 38.1 mm (1.0 or 1.5 inches)
33 to 110 mm (1.33 to 4.33 inches)
41 mm (1.6 inches)
13 mm (0.5 inches)
4
Yes
Yes
Yes
Intermec Programming Language (IPL)
21 (bitmap) + 3 (outline) resident fonts
Horizontal max 999 times, vertical max 999
times up to a maximum size of 4 inches.
33
230 × 257 × 167 mm
(9.06 × 10.11 × 6.58 inches)
Approx. 2.3 kg (5 pounds)
+5°C to +40°C (+41°F to +104°F)
-20°C to +50°C (-4°F to +122°F)
10 to 90% non-condensing
32-bit 20 MHz
2048K
512K
Separate unit
100 to 240 VAC, 50 to 60Hz, 1.9A
24 VDC, 3.0A
23.5 VDC ± 0.5V, 6A peak
= 864 dots
Standard (no cartridge)
Requires optional cutter
No PSU connected
Intermec EasyCoder PC41—Service Manual