Drive And Propeller Shafts; Drive Shaft Sleeve; Shift-Plunger, Shift-Shaft, And Boot; Propeller And Anode - Yamaha 20C Service Manual

LOWR
INSPECTION
I56000-0

DRIVE AND PROPELLER SHAFTS

1) Visually inspect the shafts, looking for grooved
wear on the surface in contact with the bearings
and oil-seals, and looking for wear on the
splines. Replace if worn or damaged.
I56300-0

DRIVE SHAFT SLEEVE

1) Visually inspect the sleeve for wear and cracks.
If any damage is found, replace the sleeve.
I56500-0

SHIFT-PLUNGER, SHIFT-SHAFT, AND BOOT

1) Inspect the shift-plunger for signs of wear or
damage, looking particularly for denting of the
contact surface, and replace if required.
2) Inspect the shift-rod boot for breakage or dam-
age, and replace the boot if damage is found.
I57001-0*

PROPELLER AND ANODE

9 Refer to CHAPTER 3 for periodic inspection
instructions.
6-8
E