Setting Select Memory Channels; D Setting In Scan Screen; D Setting In Memory List Screen; D Erasing The Select Scan Setting - Icom ic-7700 Instruction Manual

■ Setting select memory channels

D Setting in scan screen

D Setting in memory list screen

D Erasing the select scan setting

q Push
EXIT/SET
tion screen, if necessary.
w Select memory mode.
e Push [SCAN]
F-5
r Select the desired memory channel to set as a se-
lect memory channel.
• ∫ / keys and direct keypad selections can be
√
used.
t Push [SELECT]
ory channel as a select memory ★1, ★2, ★3 or not.
y Repeat steps r to t to program another memory
channel as a select memory channel.
u Push to exit the scan screen.
EXIT/SET
q Push
EXIT/SET
tion screen, if necessary.
w Push [MEMORY]
screen.
e Rotate the main dial while pushing [ROLL]
[SET] to select the desired memory channel.
F-2
∫
• / √ keys and direct keypad selections can be
used.
r Push [SELECT]
ory channel as a select memory ★1, ★2, ★3 or not.
t Repeat steps e to r to program another memory
channel as a select memory channel.
y Push EXIT/SET to exit the memory list screen.
q Push EXIT/SET
tion screen, if necessary.
w Push [MEMORY]
screen, or push [SCAN]
screen.
e Hold down [SELECT]
memory select all clear window.
r Push one of the following keys to clear all select
scan setting.
[★1] : Clears all ★1 setting.
F-1
[★2] : Clears all ★2 setting.
F-2
[★3] F-3 : Clears all ★3 setting.
[★1,2,3] F-4 : Clears all select setting.
t Push to exit the memory list screen.
EXIT/SET
9-7
SCANS
several times to close a multi-func-
to select the scan screen.
several times to set the mem-
F-3
several times to close a multi-func-
F-4 to select memor y list
F-3 several times to set the mem-
several times to close a multi-func-
to select memor y list
F-4
to select scan
F-5
F-3 for 1 second to display
9
or
F-1