Icom ic-7700 Instruction Manual page 167

■ Level set mode
CW RX HPF/LPF
Sets the high-pass filter (100 Hz to 2000 Hz) and
low-pass filter (500 Hz to 2400) of the receive audio
in 100 Hz steps in CW mode. (default: OFF)
RTTY RX HPF/LPF
Sets the high-pass filter (100 Hz to 2000 Hz) and
low-pass filter (500 Hz to 2400) of the receive audio
in 100 Hz steps in RTTY mode. (default: OFF)
PSK RX HPF/LPF
Sets the high-pass filter (100 Hz to 2000 Hz) and
low-pass filter (500 Hz to 2400) of the receive audio
in 100 Hz steps in PSK mode. (default: OFF)
SSB TX Tone (Bass)
Sets the bass level of the transmit audio tone in SSB
mode from –5 to +5. (default: 0)
Tone (Treble)
Sets the treble level of the transmit audio tone in
SSB mode from –5 to +5. (default: 0)
AM TX Tone (Bass)
Sets the bass level of the transmit audio tone in AM
mode from –5 to +5. (default: 0)
Tone (Treble)
Sets the treble level of the transmit audio tone in AM
mode from –5 to +5. (default: 0)
FM TX Tone (Bass)
Sets the bass level of the transmit audio tone in FM
mode from –5 to +5. (default: 0)
Tone (Treble)
Sets the treble level of the transmit audio tone in FM
mode from –5 to +5. (default: 0)
(continued)
– – – – – – –
– – – – – – –
– – – – – – –
12-5
SET MODE
0
0
0
0
0
0
12