Recording A Received Audio (Short Rec); D One-Touch Recording; Playing Back The Recorded Audio (Short Rec); D Basic Playing - Icom ic-7700 Instruction Manual

■ Recording a received audio (Short REC)

D One-touch recording

■ Playing back the recorded audio (Short REC)

D Basic playing

� �
F-1 F-2
Appears
REC
PLAY
F-3
Appears
Counts down
VOICE RECORDER FUNCTIONS
Up to 20 channels of receive voice memories are
available in the IC-7700. And the total audio length
of up to 209 seconds can be recorded in receive
channels. However, the maximum recordable length
into a single memory is 30 seconds.
This Voice Recorder does not record only the received
audio, but also the information such as set operating
frequency, mode, and the recording time for your fu-
ture reference.
➥ Push momentarily to records the previous 15
REC
seconds audio.
• The recordable time period can be set in voice set mode.
(p. 7-13)
• The operating frequency, mode and current time are au-
tomatically programmed as the memory names.
NOTE: When transmit (or [PTT] is pushed) within
the set period, no audio will be recorded.
IMPORTANT!
When you record the 21st audio segment, or when
the total audio length exceeds 209 seconds, the old-
est recorded audio is automatically erased to make
room for the new audio.
q Push
EXIT/SET
function screen, if necessary.
w Push [VOICE]
menu.
e Push [PLAY]
F-1
screen.
• Previously selected screen, TX or RX memory, is dis-
played. If the TX memory message (T1–T4) appears,
push [T/R]
F-7
r Push [Y]
F-1
voice memory to playback.
t Push [PLAY]
F-3
• " " indicators appear and the timer counts down.
≈PLAY
y Push [PLAY]
F-3
sired.
• Playback is terminated automatically when all of the re-
corded contents in the message are played.
u Push
EXIT/SET
screen.
7-7
several times to close a multi-
to display the Voice recorder
F-2
to display the Voice recorder
to select RX memory message.
or [Z] to select the desired
F-2
to start playback.
again to stop playback if de-
twice to exit the voice recorder
7