3D Menu - Digital Projection M-Vision 930 3D Series Installation And Quick Start Manual

Digital Projection M-Vision 930 Series

3D menu

Use this menu to enable, disable and set up 3D input, as follows:
•
3D Format — Off , Auto , Side by Side (Half)
Dual-Pipe .
•
DLP Link — On (if you are using 3D glasses that can utilise the DLP Link®
signal embedded in the image) and
•
— and
3D Swap Normal Reverse
images are displayed in the wrong order)
•
e — , ,
Dark Tim 0.65 ms 1.3 ms 1.95 ms
effect of images overlapping while the glasses are switching
•
Sync Offset — use the LEFT and
for signal processing delays in the projector.
Operating Guide
, T op and Bottom and
Off
(set to if the left- and right-eye
Reverse
and . Set to reduce the
2.5 ms
RIGHT arrow buttons to compensate
USING THE PROJECTOR
3D >>
3D Format
DLP Link
Eye Swap
Dark Time
Sync Offset
Select Item Adjust
Notes
Auto
For further information about
supported 3D formats, see
connections
Guide.
If 3D Format
no 3D signal is detected in
mode, the following settings will be
unavailable:
•
3D Swap
•
Dark Time
•
[Menu] Return
Sync Offset
Frame Sequential is supported on
the DVI input only.
3D video is only possible on the
HDMI, HDBaseT and DVI inputs.
The Frame Packing format is
automatically detected by the
projector.
See also 3D types
settings explained
guide.
Rev C February 2015
3D
in the Connection
is set to Off , or if
Auto
and Some 3D
further in this
page 59