Table of Contents
Advertisement
Digital Projection M-Vision 930 Series
Signal Inputs
Digital inputs and outputs
HDBaseT
1
Receives digital signal from HDBaseT-compliant
devices.
HDMI 1, HDMI 2, Dual Pipe 3D
2
Two identical single HDMI 1.4 inputs which support
HDCP 1.1 and DVI 1.0.
Used together, the two sockets become a dual HDMI
input which supports Dual Pipe 3D.
Dual Pipe 3D supports sources up to 1920x1200
resolution at frame rates consistent with up to 148.5
Mpx/sec/pipe (including blanking).
DVI
3
This input has a DVI-I connector, which can receive
digital (DVI-D) signal from a compatible source.
Supports sources up to 1920x1200 resolution, 24-120
Hz. Supports HDCP.
Connection Guide
SIGNAL INPUTS
1
2
3
Digital connections
1
HDBaseT
2
HDMI 1 & HDMI 2
3
DVI
Notes
For a complete listing of all
supported signal input modes, see
Appendix C: Supported Signal
Input Modes
in the Reference
Guide.
For a complete listing of pin
configurations for all signal and
control connectors, see
Appendix
E: Wiring Details
in the Reference
Guide.
The DVI input is designed to handle
high bandwidth signals (above 60
Hz) in addition to lower frequencies.
Rev C February 2015
page 25
Advertisement
Table of Contents
