Digital Projection M-Vision 930 Series
Positioning The Image
The normal position for the projector is at the centre of the screen. However, you can set the projector above or below the centre, or to one side,
and adjust the image using the Lens shift feature (known as rising and falling front) to maintain a geometrically correct image.
Shifting the lens up (rising front)
Shifting the lens down (falling front)
Reference Guide
POSITIONING THE IMAGE
Centered lens
Notes
For more information on shifting
the lens, see
Lens control
in the
Operating Guide.
Whenever possible, position the
projector so that the lens is centered
for the highest quality image.
Rev C February 2015
page 87