Digital Projection M-Vision 930 Series
Pulldowns - conversion into destination formats
Pulldowns are a method of converting a 24p source into a different destination format by adding extra frames to the source.
2:3 (normal) pulldown
This method is used to convert a 24p source (film) into a 60i destination (NTSC video) by adding two extra fields for every four frames,
effectively increasing the frame rate to 30 fps. The frame is split into fields and then two fields are repeated for every four original frames as
shown in the illustration below.
Original film,
24 fps
Reference Guide
FRAME RATES AND PULLDOWNS EXPLAINED
Field 1 (odd)
Field 2 (even)
Resulting video,
30 fps
Notes
Rev C February 2015
page 94