Table of Contents
Advertisement
Digital Projection HIGHlite Laser 3D Series
3D menu
Use this menu to enable, disable and set up 3D input, as follows:
•
3D Format
—
Off
,
Auto
,
Side by Side (Half)
Dual-Pipe
.
•
3D Swap
—
Normal
and
Reverse
images are displayed in the wrong order)
•
e —
,
,
Dark Tim
0.65 ms
1.3 ms
1.95 ms
effect of images overlapping while the glasses are switching
•
— use the
and
Sync Offset
LEFT
for signal processing delays in the projector.
Operating Guide
, T
op and Bottom
and
(set to
Reverse
if the left- and right-eye
and
. Set to reduce the
2.5 ms
arrow buttons to compensate
RIGHT
USING THE PROJECTOR
3D >>
3D Format
Eye Swap
Dark Time
Sync Offset
Select Item
Adjust
Notes
Auto
For further information about
supported 3D formats, see
connections
Guide.
If
3D Format
no 3D signal is detected in
mode, the following settings will be
unavailable:
•
3D Swap
•
Dark Time
•
[Menu] Return
Sync Offset
Frame Sequential is supported on
the DVI input only.
3D video is only possible on the
HDMI, HDBaseT and DVI inputs.
The Frame Packing format is
automatically detected by the
projector.
See also
3D types
settings explained
guide.
Rev C February 2015
3D
in the Connection
is set to
Off
, or if
Auto
and
Some 3D
further in this
page 60
Advertisement
Table of Contents
