Geometry - Digital Projection M-Vision 930 3D Series Installation And Quick Start Manual

Digital Projection M-Vision 930 Series
Menu Sub Menus

GEOMETRY

Aspect Ratio 16:9, TheaterScope, 4:3, 4:3 Narrow, 16:10, 5:4, Source
Overscan Off, Crop, Zoom
Keystone
Horizontal Keystone (slider, value range -350 ~ 350 [0])
Vertical Keystone (slider, value range -200 ~ 200 [0])
Rotation
Rotation Adjust (slider, value range -20 ~ 20 [0])
Pincushion / Barrel
Pincushion / Barrel Adjust (slider, value range -100 ~ 100 [0])
Top Left Corner
Top Left Corner Adjust
Horizontal (slider, value range -192 ~ 192 [0])
Vertical (slider, value range -120 ~ 120 [0])
Top Right Corner
Top Right Corner Adjust
Horizontal (slider, value range -192 ~ 192 [0])
Vertical (slider, value range -120 ~ 120 [0])
Bottom Left Corner
Bottom Left Corner Adjust
Horizontal (slider, value range -192 ~ 192 [0])
Vertical (slider, value range -120 ~ 120 [0])
Bottom Right Corner
Bottom Right Corner Adjust
Horizontal (slider, value range -192 ~ 192 [0])
Vertical (slider, value range -120 ~ 120 [0])
Reset (command)
Blanking
Top (slider, value range -360 ~ 360 [0])
Bottom (slider, value range -360 ~ 360 [0])
Left (slider, value range -534 ~ 534 [0])
Right (slider, value range -534 ~ 534 [0])
Reset (command)
Reference Guide
APPENDIX D: MENU MAP
Notes
Some of the information in this menu
map is summarised. See the actual
menu on the projector for full details.
The underlined text represents
the factory default value for each
setting.
Rev C February 2015
page 107