Table of Contents
Advertisement
Digital Projection M-Vision 930 Series
Image menu continued from previous page
Gamma
Choose a de-gamma curve from
1.0
,
1.8
Used correctly, the
Gamma
setting can improve contrast while maintaining good
details for blacks and whites.
If excess ambient light washes out the image and it is difficult to see details in dark
areas, lower the
Gamma
setting to compensate. This improves contrast while
maintaining good details for blacks. Conversely, if the image is washed out and
unnatural, with excessive detail in black areas, increase the setting.
Dynamic Black
Set to
to allow for increased contrast in darker scenes by modulating the light
On
source.
Adaptive Contrast
Set to
to expand the light and dark portions of the contrast curve of the image,
On
depending on the mean luminance of the image.
Saturation, Hue, Sharpness and Noise Reduction
Highlight the setting you wish to edit, and then press
LEFT
or
RIGHT
arrow button to open the slider.
Use the
and
arrow buttons to adjust the slider.
LEFT
RIGHT
Press
MENU
to close the slider.
Operating Guide
,
2.0
,
2.2
,
2.35
and
2.5
.
, or the
ENTER/SELECT
USING THE PROJECTOR
Image >>
Picture Mode
Brightness
Contrast
Gamma
Dynamic Black
Adaptive Contrast
Saturation
Hue
Sharpness
Noise Reduction
Position and Phase
Resync
Select Item
[Enter] Execute
Image >>
Picture Mode
Brightness
Contrast
Gamma
Dynamic Black
Adaptive Contrast
Saturation
Hue
Sharpness
Noise Reduction
Position and Phase
Resync
Select Item
[Enter] Execute
Notes
1.0
1.8
2.0
2.2
2.35
2.5
[Menu] Return
Off
On
[Menu] Return
Rev C February 2015
page 41
Advertisement
Table of Contents
