Digital Projection M-Vision 930 Series
Color menu continued from previous page
Gamut
In most cases, the
Auto
setting will determine the correct color gamut to use.
If it does not, you can select the appropriate setting manually.
Each setting defines the precise hue of each primary (red, green and blue)
and secondary (yellow, cyan and magenta) color component used to generate
the image.
Use the
LEFT
and
RIGHT
arrow buttons to select from:
•
Auto
•
REC709
for most other sources
•
for NTSC, 480i and 480p sources
SMPTE-C
•
for PAL, SECAM, 576i and 576p sources
EBU
•
Native
— no correction
RGB Lift and Gain
Adjust the RGB lift and gain settings to improve the color balance of the projected
image.
Highlight the setting you wish to edit, and then either press
access it, or use the
and
LEFT
RIGHT
values.
Operating Guide
USING THE PROJECTOR
to
ENTER/SELECT
arrow buttons to switch between
Color >>
Color Space
Auto
Color Temperature
REC709
Color Gamut
SMPTE– C
Red Lift
Green Lift
EBU
Blue Lift
Native
Red Gain
Green Gain
Blue Gain
Select Item
[Enter] Execute
[Menu] Return
Notes
Rev C February 2015
page 45