Table of Contents
Advertisement
3D menu
Use this menu to enable, disable and set up 3D input, as follows:
3D Format — Off, Dual Pipe and Frame Sequential.
l
Frame Sequential is for sources where Left and Right eye images are delivered as alternate frames from
a single input. Dual Pipe is for sources where Left and Right eye are delivered on separate inputs.
Eye Swap — Normal and Reverse.
l
(set to Reverse if the left- and right-eye images are displayed in the wrong order)
Dark Time — 0.65 ms, 1.3 ms and 1.95 ms.
l
Set to reduce the effect of banding and image overlapping when viewed through 3D glasses.
Sync Offset.
l
Use the LEFT and RIGHT arrow buttons to compensate for image overlapping (ghosting) when viewed
through 3D glasses.
Sync Reference— External and Internal.
l
Select the source of the 3D sync. Internal is referenced to the incoming video. External is for Frame
Sequential 3D sources and is supplied by the graphics card or player.
Operating Guide
Using the projector
3D Format
Eye Swap
Dark Time
Sync Offset
Sync Reference
Digital Projection Ltd. Titan Laser WUXGA
3D
3D video is only possible
on the HDMI 3 and HDMI
Off
4 inputs.
Normal
If 3D Format is set to Off,
1.95 ms
all other 3D settings will
100
be unavailable.
Internal
See 3D connections on
page 34 for more
information about
supported 3D formats.
The following settings are
not available when 3D is
on:
Image > Brightness,
Contrast, Saturation, Hue,
Sharpness, Noise
Reduction, Freeze,
Resync.
Color > Color Space.
Geometry > Aspect Ratio,
Digital Zoom, Overscan.
Setup > Screen Setting,
Auto Source, Trigger-1,
Trigger-2.
PIP > all settings.
Also: See 3D types on the
next page and See Some
3D settings explained on
page 75
See 3D formats on
page 119 for 3D
resolutions and frame
rates.
Notes
Rev A January 2019
page 73
Advertisement
Table of Contents
