Digital Projection M-Vision 930 Series
Appendix D: Menu Map
Menu
Sub Menus
MAIN
Input HDMI1, HDMI2, VGA, Comp1, Comp2, DVI, HDBaseT
Test Pattern Off, White, Black, Red, Green, Blue, CheckerBoard, CrossHatch, V Burst, H Burst, Color Bar
LENS
Lens Control
Zoom / Focus mode
Zoom (uses input from the UP and DOWN arrows to zoom the image)
Focus (uses input from the LEFT and RIGHT arrows to focus the image)
Lens Shift mode
Lens Shift (uses input from the arrows to shift the lens)
Lens Center (command)
IMAGE
Picture Mode Bright, Presentation, Video
Brightness (slider, value range 0~ 200 [100])
Contrast (slider, value range 0~ 200 [100])
Gamma 1.0, 1.8, 2.0, 2.2, 2.35, 2.5
Adaptive Contrast Off, On
Saturation (slider, value range 0~ 200 [100])
Hue (slider, value range 0~ 200 [100])
Sharpness (slider, value range 0~ 200 [100])
Noise Reduction (slider, value range 0~ 200 [100])
Position and Phase
V Position (slider, value range 0~ 200 [100])
H Position (slider, value range 0~ 200 [100])
Phase (slider, value range 0~ 200 [100])
Tracking (slider, value range 0~ 200 [100])
Sync Level (slider, value range 0~ 200 [100])
Resync (command)
Reference Guide
APPENDIX D: MENU MAP
Notes
Some of the information in this menu
map is summarised. See the actual
menu on the projector for full details.
The underlined text represents
the factory default value for each
setting.
Rev C February 2015
page 105