Digital Projection M-Vision 930 Series
Information menu
This menu gives information about software and hardware configuration, input
source and lamp operating times It also allows you to restore the factory default
settings.
Factory Reset
To restore the factory default settings:
1.
Navigate to Factory Reset and press
2.
When prompted, use the
LEFT
and
Yes button and then press
/
ENTER
SELECT
Operating Guide
/
.
ENTER
SELECT
RIGHT
arrow buttons to highlight the
to confirm your choice.
USING THE PROJECTOR
Information >>
Model Name :
M-Vision WUXGA 930–3D
Serial Number :
W343AGFCY0002
Software Version 1 :
ME11–GE04–8B05–011D
Software Version 2 :
LE03–RE01–3C3C-S42
FPGA Version :
2.0–1.0_4.0–2.0
Active Source :
HDMI 1
Signal Format :
1080p/60Hz
67.39KHz/60.00Hz/148.50MHz
Lamp1 Hours :
76 HRS
Lamp2 Hours :
76 HRS
Factory Reset
Select Item
[Enter] Execute
Reset Everything
Yes
< Execute >
[Menu] Return
No
Notes
Rev C February 2015
page 68