Changing The Lamps; Changing The Lamps - Digital Projection M-Vision 930 3D Series Installation And Quick Start Manual

Digital Projection M-Vision 930 Series

Changing The Lamps

1. Remove the lamp cover (Fig. 1).
2. Loosen the screws of the lamp modules (Fig. 2).
Pull the lamp modules out of the enclosures (Fig. 3).
3.
Installation and Quick-Start Guide

CHANGING THE LAMPS

Fig. 1
Fig. 2
Fig. 3
Notes
Before removing the lamp
modules for replacement, turn
off the projector and unplug the
power cord.
Let the projector cool for
approximately 60 minutes.
Rev C February 2015
page 16