Digital Projection M-Vision 930 Series
Adjusting the lens
The lens can be adjusted using the
Lens
remote control.
The
LENS
button opens the
Lens Control
and shift. The
menu gives you access to the
Lens
command.
Lens Center
Lens Control
allows you to adjust
Zoom
buttons. The setting operates in
Zoom/Focus Adjustment
mode.
Press
ENTER/SELECT
to switch between modes as follows:
•
Zoom/Focus Adjustment
mode with the source
image
•
Shift Adjustment
mode with the source image
•
mode with an
Zoom/Focus Adjustment
alignment grid
•
mode with an alignment grid
Shift Adjustment
•
Zoom/Focus Adjustment
mode with an aspect
test
•
Shift Adjustment
mode with an aspect test
•
mode with a screen
Zoom/Focus Adjustment
layout pattern
•
mode with a screen layout
Shift Adjustment
pattern
...
Installation and Quick-Start Guide
OPERATING THE PROJECTOR
menu, or using the
button on the
LENS
setting, which adjusts zoom, focus
setting and the
Lens Control
,
Focus
and
Shift
using the arrow
and
Shift Adjustment
1.60:1 (16:10)
1.66:1
1.78:1 (16:9)
1.85:1
1.33:1 (4:3)
2.35:1
Lens Control
Zoom
Focus
[Enter] Shift Adjustment
Lens Control
Shift
[Enter] Zoom/Focus Adjustment
Notes
Rev C February 2015
page 20