Edge Blend Menu - Digital Projection M-Vision 930 3D Series Installation And Quick Start Manual

Digital Projection M-Vision 930 Series

Edge Blend menu

•
Edge Blend
Enable and disable
Edge Blend
•
Align Pattern
When switched on, this feature makes the overlaps more visible and helps
adjust the physical position of the projectors in the array.
•
Blend Width
Determine the width of the blended regions.
•
Black Level Uplift
Adjust black levels to compensate if the blended regions appear brighter than
the rest of the image.
•
Reset
Reset all settings to their factory default values.
Edge Blend
Operating Guide
USING THE PROJECTOR
Edge Blend >>
Edge Blend
Align Pattern
Blend Width
Black Level Uplift
Reset
Select Item Adjust
Notes
Off
When Edge Blend
On
all other edge blend settings are
disabled.
< Execute >
Some controls in the
Blend menu may be unavailable
depending on other settings. For
more information, see
Geometry and Edge Blend
combinations
[Menu] Return
Rev C February 2015
is set to Off ,
Edge
Possible
further in this guide.
page 55