Setup; Presets - Digital Projection M-Vision 930 3D Series Installation And Quick Start Manual

Digital Projection M-Vision 930 Series
Menu Sub Menus

SETUP

Orientation Desktop Front, Ceiling Front, Desktop Rear, Ceiling Rear
Auto Power Off Off, On
Auto Power On Off, On
Startup Logo Off, On
Blank Screen Logo, Black, Blue, White
Trigger 1 Screen, 16:9, TheaterScope, 4:3, 4:3 Narrow, RS232
Trigger 2 Screen, 16:9, TheaterScope, 4:3, 4:3 Narrow, RS232
Auto-Source Off, On
Infrared Remote Off, On
Network
DHCP Off, On
IP Address (numeric input, IP address format)
Subnet Mask (numeric input, IP address format)
Gateway (numeric input, IP address format)
DNS (numeric input, IP address format)
Apply Settings (command)
Standby Power Off, On
LAN Status (informatiojn only)
MAC (information only)
On Screen Display
Position Top-Left, Top-Right, Bottom-Left, Bottom-Right, Center
Transparency 0%, 25%, 50%, 75%
Timeout Always On, 10 Seconds, 30 Seconds, 60 Seconds
Messaging Off, On

Presets

Recall Preset Preset A, Preset B, Preset C, Preset D, Default
Save Preset Preset A, Preset B, Preset C, Preset D
Reference Guide
APPENDIX D: MENU MAP
Notes
Some of the information in this menu
map is summarised. See the actual
menu on the projector for full details.
The underlined text represents
the factory default value for each
setting.
Rev C February 2015
page 109