Exit Menu - NEC LS2400 Service & Reference Manual

Exit Menu

You can make the following selections on the Exit Menu. Select an
option using the up or down arrow keys, then press <Enter> to execute
the option. Pressing <Esc> does not exit this menu. You must select
one of the items from the menu or menu bar to exit.
Choices
Exit Saving Changes
Exit Discarding
Changes
Load Setup Defaults
Load Custom Defaults
Save Custom Defaults
Discard Changes
Save Changes
Description
Exits after writing all modified Setup item values to CMOS.
Exits leaving CMOS unmodified.
Loads default values for all Setup items.
Loads settings from custom defaults.
Saves present Setup values to custom defaults.
Reads the previous value of all Setup items from CMOS.
Writes all Setup item values to CMOS.
Configuring Your System 3-19