Chapter 2 Convenient Features
5.3.4
Executing a Consistency Check
1. Run the LSI Software RAID Configuration Utility.
2. Select Check Consistency from the TOP menu.
The Virtual Drives screen appears.
3. Move the cursor to the Hard Disk Drive to be checked for consistency, and then press the space key to
select it. The Virtual Drive is selected.
4. Press the <F10> key .
5. When the confirmation message for execution appears, select [Yes] to start a Consistency Check.
The Consistency Check completes when the Completed progress bar on the CC Under Progress
screen becomes 100%.
6. Press the <Esc> key to return to the TOP menu screen, and then exit the LSI Software RAID
Configuration Utility.
Run the LSI Software RAID Configuration Utility
Execute a Consistency Check
Exit the LSI Software RAID Configuration Utility
Be sure to execute a Consistency Check after creating a configuration.
Important
Do not execute a Consistency Check for RAID0.
Express5800/E120d-1 Maintenance Guide
5. RAID System Configuration
107