Enabling Other Management Access Options - Ruckus Wireless ZoneFlex 2741 User Manual

Enabling Other Management Access Options

In addition to managing the AP via a Web browser through HTTPS, several other
management access options are available on the AP. These options include manage-
ment access via HTTP, Telnet, and SSH.
In addition to these management access options, you can also view and set up the
connection to the Ruckus Wireless FlexMaster under the TR-069/SNMP Manage-
ment Choice options. If your ZoneFlex device is to be managed by FlexMaster, then
the FlexMaster information (server URL and contact interval) is preconfigured before
you receive your ZoneFlex device.
NOTE: If you are configuring the AP to be managed by FlexMaster, remember to
point it to the FlexMaster server after you configure the management access options.
For more information, refer to
To enable other management access options
1. Go to Administration > Management. The Management page appears.
2. Review the access options listed in
Table 13. Management Access Options
Option
Telnet access
Telnet port
SSH access
SSH port
HTTP access
HTTP port
HTTPS access
HTTPS port

Enabling Other Management Access Options

"Pointing the AP to FlexMaster"
Table 13, and then make changes as needed.
Description
By default, this option is disabled (inactive).
This field lists the default Telnet port of 23 — only
if Telnet is active. You can manually change this
port number, if required.
By default, this option is enabled (active).
This field lists the default SSH port of 22—only if
SSH is active. You can manually change this port
number if required.
This option is disabled by default.
This field lists the default HTTP port of 80, if HTTP
has been activated. You can manually change this
port number if required.
By default this option is enabled. This connection
mode requires a security certificate, a copy of
which has been pre-installed in the device.
This field lists the default HTTPS port of 443—only
if HTTPS has been activated. You can manually
change this port number if required.
Managing the Access Point
on page 88.
85