Verifying That Wireless Clients Can Associate With A Managed Ap; What To Do Next - Ruckus Wireless SmartCell Gateway 200 Getting Started Manual

Verifying That Wireless Clients Can Associate
with a Managed AP
The last step in the SCG setup process is to verify that APs can register with the
SCG and that wireless clients can associate with the APs successfully.
Follow these steps to verify that wireless clients can connect to the network.
1 Verify that the SCG is connected to the backbone network.
2 Physically connect an AP to the same network as the SCG. If DHCP option 43
was configured correctly, this AP should be able to locate the SCG on the
network and to register with it successfully.
3 Check the SCG Dashboard. The AP zone that you created earlier should have
at least one member AP (the AP that you connected to the network in
The AP count appears green, which indicates that it is online.
4 Associate a wireless client with the AP. The following describes the procedure if
you are using a Windows-based wireless client.
a In the system tray, right-click the
then click View Available Wireless Networks.
b In the list of available wireless network, click the wireless network name (SSID)
that you configured on the AP.
c Click Connect.
Your wireless client connects to the wireless network. After the wireless client
connects to the wireless network successfully, the wireless client icon in the
system tray changes to
5 Start your web browser, and then enter www.ruckuswireless.com in the
address bar.
If you are able to connect to the Ruckus Wireless website, you have completed
setting up the SCG on the network. Congratulations!

What to Do Next

For more information on configuring and managing the SCG, refer to the SmartCell
Gateway 200 Administrator Guide, which is available for download on the Ruckus
Wireless Support website at http://support.ruckuswireless.com.
NOTE: For a complete list of documentation that is available for the SmartCell
Gateway 200 Release 2.5, refer to the Release Notes.
SmartCell Gateway 200 Release 2.5.1 Getting Started Guide, 800-70768-001 Rev A

Verifying That Wireless Clients Can Associate with a Managed AP

(Wireless Network Connection) icon, and
.
Configuring the SCG for the First Time
Step 2).
79