Preparing for Installation
Preconfiguring the Access Point (Standalone Only)
Step 4: Configure the Wireless Settings
To complete this step, you will need to configure the settings on the Common tab and at
least one Wireless # tab. These are the essential wireless settings that will enable wireless
devices on the network to associate with the access point.
NOTE: ZoneFlex 7762 has one 2.4GHz radio and one 5GHz radio. The wireless settings
for each radio need to be configured separately on the Web interface (except for the
country code setting, see note in
Configuration > Radio 2.4G. To configure the 5GHz radio settings, click Configuration
> Radio 5G.
For your reference, the default wireless settings on the access point are listed in
Table 4.
Default wireless settings
Setting
SSID (network name)
Encryption (security)
Default management IP address
Configure Common Wireless Settings
1. On the left menu of the Web interface, click Configuration > Radio {2.5/5} G. The
Common page appears.
2. Verify that the common wireless settings are configured as listed in
Table 5.
Common wireless configuration
Setting
Wireless Mode
Channel
Channel Width
10
Table
4). To configure the 2.4GHz radio settings, click
Default Value
Wireless 1 to Wireless 8 (8 WLANs)
Disabled on all WLANs
192.168.100.2
Recommended Value
Auto-select
SmartSelect
20MHz or 40MHz
Table
4.
Table
8.