Installing The Upper Case - SELVA MARINE Blue Whale 250 EFI Service Manual

BRKT
2. Install the rubber seal 3 into the joint
hole a of the upper case.
3. Install the oil pan assembly 4 by insert-
ing the tip of the cooling water pipe 5
into the joint hole a of the upper case.
4. Install muffler assembly bolts 6 and 7,
and PCV 8, and then tighten them to the
specified torques.
LT LT
572
A A
3
a
Oil pan assembly bolt (M8) 6:
20 N·m (2.0 kgf·m, 14.8 ft·lb)
Oil pan assembly bolt (M10) 7:
42 N·m (4.2 kgf·m, 31.0 ft·lb)
PCV 8: 8 N·m (0.8 kgf·m, 5.9 ft·lb)
5. Install the damper 9, cover 0, and
engine oil drain bolt A.
Engine oil drain bolt A:
27 N·m (2.7 kgf·m, 19.9 ft·lb)
7-13
Bracket unit
A A
8
7
6
572
4
5
A A
5
3
S6P27480E
6. Install the upper mounts B and bolts into
the upper case.
7. Install the bracket C, and then tighten
the bolts D to the specified torque.
LT LT
Upper mount bracket bolt D:
8. Install the lower mounts E and mount
housings F.

Installing the upper case

1. Install the upper and lower mounting
bolts into the swivel bracket 1 simulta-
neously.
2. Install the upper mounting nuts 2 and
lower mounting nuts 3, and then tighten
them to the specified torques.
54 N·m (5.4 kgf·m, 39.8 ft·lb)
6P23H11