SELVA MARINE Blue Whale 250 EFI Service Manual page 285

2. Connect the PTT motor leads 4 to the
brush holder 5, and then install the
brush holder 5 to the motor base 6.
3. Install the brushes 7 and springs 8 to
the brush holder as shown.
4. Install the bearing 9 to the armature 0.
5. Push the brushes 7 into the holders,
and then install the armature 0.
6P23H11
6. Install the wave washer A and washer
B into the stator C.
7. Install the new O-ring and stator C to the
motor base.
NOTE:
Place a clean cloth over the end of the arma-
ture shaft, hold it with a pair of pliers, and
then carefully slide the stator over the arma-
ture.
PTT motor
1
2
3
4
5
6
7
8
9
7-30