2. Set the gear shift to the neutral position
at the lower unit.
Shift rod push arm: 90890-06052
3. Install the dowels 1 into the lower unit.
4. Install the lower unit into the upper case,
and then tighten the lower case mounting
bolts (nuts) 2 to the specified torque.
5. Install the trim tab 3 to its original posi-
tion, and then tighten the bolt 4 to the
specified torque.
6P23H11
Drive shaft and lower case (regular rotation model)
È U-transom model
Lower case mounting bolt (nut) 2:
47 N·m (4.7 kgf·m, 34.7 ft·lb)
Trim tab bolt 4:
42 N·m (4.2 kgf·m, 31.0 ft·lb)
1
2
3
4
5
6
7
8
9
6-20