Removing The Water Pump And Shift Rod; Checking The Water Pump And Shift Rod - SELVA MARINE Blue Whale 250 EFI Service Manual

LOWR
Removing the water pump and shift
rod
1. Remove the water pump housing 1 and
impeller 2.
2. Remove the Woodruff key 3.
3. Remove the outer plate cartridge 4.
4. Set the gear shift to the neutral position,
and then remove the shift rod assembly
5.
Shift rod push arm: 90890-06052
Checking the water pump and shift
rod
1. Check the water pump housing. Replace
if there is deformation.
2. Check the impeller and insert cartridge.
Replace if cracked or worn.
3. Check the Woodruff key 1 and the
groove a on the drive shaft. Replace if
worn.
6-5
Lower unit
a
4. Check the shift rod. Replace if cracked or
worn.
1
S6P26660
6P23H11