3. Pass the speedometer hose through the
steering arm, and then connect it to the
adapter.
4. Connect the ground lead.
Upper mounting nut 2:
72 N·m (7.2 kgf·m, 53.1 ft·lb)
Lower mounting nut 3:
72 N·m (7.2 kgf·m, 53.1 ft·lb)
Removing the steering arm
1. Remove the circlip 1.
2. Remove the steering yoke 2 by striking
it with a plastic hammer.
6P23H11
Upper case and steering arm
3. Remove the steering arm from the swivel
bracket by pulling the arm off the bracket.
Installing the steering arm
1. Install the washer 1 and bushing 2 onto
the steering arm 3.
2. Place the swivel bracket 4 in an upright
position, and then install the steering arm
onto the swivel bracket.
3. Install the bushing 5, new O-ring 6,
bushing 7, and washer 8 onto the
swivel bracket.
1
2
3
4
5
6
7
8
9
7-14