Assembling The Forward Gear; Assembling The Drive Shaft Housing; Installing The Drive Shaft - SELVA MARINE Blue Whale 250 EFI Service Manual

NOTE:
• Apply gear oil to the needle bearing outer
case before installation.
• The needle bearing contains 24 rollers.
Ball bearing attachment 3:
90890-06655
Bearing outer race puller
assembly 4:
90890-06523

Assembling the forward gear

1. Install a new taper roller bearing into the
forward gear using a press.
Bearing inner race attachment 1:
90890-06659

Assembling the drive shaft housing

1. Install the needle bearing into the drive
shaft housing to the specified depth.
6P23H11
Drive shaft and lower case (regular rotation model)
Needle bearing attachment 1:
90890-06610
Driver rod SS 2: 90890-06604
Depth a:
4.5 ± 0.25 mm (0.18 ± 0.01 in)
2. Apply grease to the new oil seals, and
then install them into the drive shaft
housing to the specified depth.
4
NOTE:
Install an oil seal halfway into the drive shaft
housing, then the other oil seal.
Bearing outer race attachment 3:
90890-06628
Driver rod LS 4: 90890-06606
Depth b:
0.5 ± 0.25 mm (0.02 ± 0.01 in)

Installing the drive shaft

1. Install the forward gear into the lower
case.
3
S6P26120E
1
2
3
4
5
b
6
7
8
9
6-16