SELVA MARINE Blue Whale 250 EFI Service Manual page 184

POWR
14. Install the new gasket and oil filter
bracket, and then tighten the bolts in the
sequence shown.
STBD
!
$
#
NOTE:
Apply engine oil to the oil filter bracket bolts
before installation.
15. Supply engine oil to the oil passage r of
the oil filter bracket.
16. Install the oil filter, and then tighten it to
the specified torque using a 72.5 mm
(2.9 in) oil filter wrench.
5-71
Power unit
UP PORT
%
±
S6P25B50
NOTE:
Apply a thin coat of engine oil to the O-ring of
the new oil filter before installation.
Oil filter wrench: 90890-06830
Oil filter:
18 N·m (1.8 kgf·m, 13.3 ft·lb)
17. Fasten the cooling water hose G, vapor
gas hoses, and check valve H using the
holder as shown.
G
8
18. Install the cooling water passage cover
and cylinder heads.
NOTE:
To install the cooling water passage cover
and cylinder heads, see "Installing the cool-
ing water passage cover" and "Installing the
cylinder head."
G
H
H
S6P25B80
6P23H11