Servicing Right-Side Components - Arctic Cat 2009 366 Service Manual

Servicing Right-Side
Components
NOTE: Whenever a part is worn excessively,
cracked, damaged in any way, or out of tolerance,
replacement is necessary.
INSPECTING CENTRIFUGAL
CLUTCH SHOE
1. Inspect the clutch shoe for uneven wear, chips,
cracks, or discoloration.
2. Inspect the depth of the grooves in the clutch
shoes. If any shoe is worn to the bottom of the
groove, replace the complete set.
! CAUTION
Always replace clutch shoes as a complete set or
severe imbalance could occur.
INSPECTING CENTRIFUGAL
CLUTCH HOUSING
1. Inspect the clutch housing for burns, marks, scuffs,
cracks, scratches, or uneven wear.
2. If the housing is damaged in any way, the housing
must be replaced.
INSPECTING PRIMARY
ONE-WAY DRIVE
1. Place the one-way clutch onto the clutch shoe
assembly with the green dot or the word "OUT-
SIDE" directed away from the clutch shoe.
Back
ATV1014
Back to TOC
2. Place the clutch housing onto the clutch
shoe/one-way clutch.
NOTE: It will be necessary to rotate the clutch
housing counterclockwise to properly seat the
one-way clutch.
3. Check that the clutch shoe can only be rotated
counterclockwise in respect to the clutch housing.
If the clutch shoe locks up or turns either direction,
the one-way clutch must be replaced.
INSPECTING OIL PUMP
1. Inspect the pump for damage.
2. It is inadvisable to remove the screw securing the
pump halves. If the oil pump is damaged, it must
be replaced.
NOTE: The oil pump is a non-serviceable compo-
nent and must be replaced as a complete assembly.
Back to Section TOC
KC330
3
KC331A
KC332A
Next
3-31