Arctic Cat 2009 366 Service Manual page 35

NOTE: Keep the mounting hardware with the cov-
ers for assembly purposes.
2. Remove the valve cover cap screws. Note the rub-
ber washers on the four top-side cap screws;
remove the valve cover. Note the orientation of the
cylinder head plug and remove it. Note the loca-
tion of the two alignment pins.
3. Loosen the cap screw on the end of the cam chain
tensioner; then remove the two cap screws secur-
ing the cam chain tensioner assembly. Remove the
tensioner assembly and gasket.
Back
MD1264
CF007A
MD1354A
Back to TOC
4. Remove the cam chain tensioner pivot cap screw
and washer.
5. Bend the washer tabs and remove the two cap
screws securing the sprocket to the camshaft.
Back to Section TOC
MD1245
3
MD1251
MD1136
MD1137
Next
3-9