Undo R & B Convergence Mid - Barco VISION 701 MULTIMEDIA Owner's Manual

ENTER sets the convergence set-
tings to their midposition. EXIT can-
cels the procedure to set the conver-
gence settings to their midposition.
Undo R & B convergence mid
When "R & B convergence mid" is
selected, all convergence settings
are set to their midposition.
cancel this action, select 'Undo R &
B convergence mid' by pushing the
control disk up or down and press
ENTER. 'Undo R & B convergence
mid' is displayed in the Memory man-
agement menu in stead off 'R & B
convergence mid' when this latter is
pressed.
An undo is possible as long as the
projector is playing on the same
source (= same adjustment block)
even when some adjustments are
already readjusted. When undo is
presssed all settings are reset to the
previous settings.
Green convergence mid
Only available when the projector is
equipped with green convergence
adjustmentes.
Highlight 'Gr convergence mid' by
pushing the control disk up or down
and press ENTER to switch off the
green convergence.
9-16
R & B CONVERGENCE MID
Convergence settings
in current block
wil be overwritten !
<ENTER> to confirm
<EXIT> to cancel
MEMORY MANAGEMENT
To
ALL SETTINGS TO MIDPOS
UNDO R & B CONVERGENCE MID
MEMORY MANAGEMENT
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
R5975228A BARCOVISION 701 MULTIMEDIA 200697
SERVICE MODE
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
GR CONVERGENCE MID
Select with or
then <ENTER>
<EXIT> to return.
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
GR CONVERGENCE MID
Select with or
then <ENTER>
<EXIT> to return.