RANDOM ACCESS ADJUSTMENT MODE
Blanking Adjustments
Blanking adjustments affect only the edges of the projected image and are used
to frame the projected image on to the screen and to hide or black out unwanted
information (or noise). A 0% on the bar scale indicates no blanking.
To start up the Blanking adjustments, follow the next procedure :
Push the control disk up or
down to highlight BLANKING
on the Geometry menu and
then press ENTER .
The following blanking corrections are possible :
- Top blanking
- Bottom blanking
- Left blanking
- Right blanking
Therefore :
- If the internal # pattern was
selected, this pattern remains
on the screen.
- If the genlocked pattern was
selected, the external source
will be displayed.
R5975238A BARCOVISION 701 MULTIMEDIA 200697
BLANKING
TOP
BOTTOM
LEFT
RIGHT
Select with
or
then <ENTER>
<EXIT> to return
Left blanking
GEOMETRY
H PHASE
RASTER SHIFT
LEFT - RIGHT (E-W)
TOP - BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
Select with
or
then <ENTER>
<EXIT> to return
ENTER will select blanking
adjustment menu.
EXIT returns to random ac-
cess adjustment mode
menu.
ADJUST returns to opera-
tional mode
Top blanking
Bottom blanking
Right blanking
8-23