Barco ULTRA REALITY 7000 R9002810 Owner's Manual
  1. Manuals
  2. Brands
  3. Barco Manuals
  4. Projector
  5. ULTRA REALITY 7000 R9002810
  6. Owner's manual
Barco ULTRA REALITY 7000 R9002810 Owner's Manual

Barco ULTRA REALITY 7000 R9002810 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
B
P
ARCO
ROJECTION
B
U
R
7000
ARCO
LTRA
EALITY
R9002810
O
'
M
WNER
S
ANUAL
30062003
R5976455/02

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ULTRA REALITY 7000 R9002810 and is the answer not in the manual?

Questions and answers

Related Manuals for Barco ULTRA REALITY 7000 R9002810

Summary of Contents for Barco ULTRA REALITY 7000 R9002810

  • Page 1 ARCO ROJECTION 7000 ARCO LTRA EALITY R9002810 ’ WNER ANUAL 30062003 R5976455/02...
  • Page 2 Product revision Software version: 1.10 Barco nv Intelligent Displays Noordlaan 5, 8520 Kuurne Phone: +32 56.36.82.11 Fax: +32 56.35.86.51 E-mail: presentations.bid@barco.com Visit us at the web: www.barco.com Printed in Belgium...
  • Page 3 Federal Communication Commission (FCC Statement) This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 5: Table Of Contents

    7.5 Keystone ..........................49 R5976455 BARCO ULTRA REALITY 7000 30062003...
  • Page 6 Glossary ....................... . . 93 R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 7: Packaging And Dimensions

    Never transport the projector with the lens mounted on it ! Always remove the lens before transporting the projector. 1.2 Dimensions Dimensions overview Dimensions are given in mm (1 inch = 25.4 mm) 371.2 202.4 53.5 53.5 29.6 187.2 152.6 152.6 Image 1-1 R5976455 BARCO ULTRA REALITY 7000 30062003...
  • Page 8 1. Packaging and Dimensions 82.7 211.4 169.5 139.6 148.9 380.6 526.8 Image 1-2 Image 1-3 R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 9: Installation Guidelines

    It is advised to clean the dustfilters on a regular basis and to replace them at any lamp change. Barco reserves itself the right to refuse warranty replacement of consumables if they have been used in a projector with dirty airfilters.

  • Page 10: Projector Configurations

    The projector is designed for projecting an image size with a screenwidth from 1.00m (3.3ft) to 6.00m (19.7ft) with an aspect ratio of 4 to 3. 2.3 Projector configurations The different configurations Rear/Ceiling Rear/Table Front/Ceiling Front/Table R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 11: Positioning The Projector

    2. Installation Guidelines Positioning the projector CD=SH/2+B-A Image 2-1 R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 12: Lenses

    2. Installation Guidelines CD=B-A Image 2-2 2.4 Lenses Overview • Lenses • Lens selection • Lens formulas • Lens installation • Cleaning the lens R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 13: Lenses

    2. Installation Guidelines 2.4.1 Lenses Available lenses The following lenses are available, or will become available (contact a BARCO service center) as an option : Lenses Standard version QFD(1.27:1) R9840400 QFD(2.5:1) R9840290 QFD(1.4-2.1:1) R9840380 QFD(2.1-3.0:1) R9840390 QFD(3.5-4.5:1) R9840060 QFD(4.5-6.0:1) R9840100...

  • Page 14: Lens Installation

    4. Push the lens locks back in position and lock the levers. 5. Plug the wires of the motor unit into the connector (image 2-6) 6. Re-install the lens cover. Image 2-4 Image 2-3 Image 2-6 Image 2-5 R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 15: Cleaning The Lens

    Do not use fabric softener when washing the cleaning cloth or softener sheets when drying the cloth. Do not use liquid cleaners on the cloth as doing so will contaminate the cloth. Other lenses can also be cleaned safely with this Toraysee cloth. R5976455 BARCO ULTRA REALITY 7000 30062003...
  • Page 16 2. Installation Guidelines R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 17: Connections

    HDSDO 9 B/PB R/PR HDSDI Image 3-1 Which signals can be connected to the 5 cable input. The following signals can be connected to these BNC connectors : Connector name RGBHV RGBS Composite video Video R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 18: 5-Cable Data Input (Bnc2)

    1. Press key 2 on the RCU or the local keypad or use the menu 3.1.4 Video input Video Composite Video is a single video signal that contains luminance, color and synchronization information. NTSC, PAL and SECAM are examples of composite video systems. R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 19: S-Video Input

    1.0Vpp ± 3dB chrominance 282 mVpp ± 3dB How to select slot 4? 1. Key in 4 on the RCU or the local keypad or use the menu (image 3-4) R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 20: Digital Visual Interface (Dvi) Input

    DVI-I type connector analog link (4 pins at the right side of the connector) not supported How to select the DVI Input ? 1. Press 5 on the RCU or the locol keypad or use the menu R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 21: Sdi Input

    1. Connect the out of your HDSDI source to the BNC HDSDI input of the projector. (image 3-7) Note: The input is always 75 ohm terminated. 2. If loop through is needed, use the HDSDO output to connect to next device. Note: The output impedance of the HDSDO is 75 ohm. R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 22: Communications

    1 to 255 • allow storage of multiple projector configurations and set ups. • wide range of control possibilities Data communication: sending data to the projector or copying the data from the projector to the computer R5976455 BARCO ULTRA REALITY 7000 30062003...
  • Page 23 3. Connections To set up the baudrate see “Installation” menu R5976455 BARCO ULTRA REALITY 7000 30062003...
  • Page 24 3. Connections R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 25: Getting Started

    "pause" (blanked picture, full power for immediate restarting) • direct access to all connected sources. 4.2 Terminology overview Overview The following table gives an overview of the different functionalities of the keys. R5976455 BARCO ULTRA REALITY 7000 30062003...
  • Page 26 (scanned) inputs Lens control use these buttons to obtain the desired ZOOM, SHIFT, FOCUS. not used Picture controls use these buttons to obtain the desired picture analog level. R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 27: Switching On

    During the power on sequence the display shows (L). After that sequence the selected source is displayed ( when no source is selected, the displays shows a point mark ). (image 4-2, image 4-3) Projector mode indication Image 4-2 R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 28: Lamp Runtime

    The total lifetime of the lamp for a safe operation is 1000 hours max, do not use it longer. Always replace with a same type of lamp. Call a BARCO authorized service technician for lamp replacement. At the end of the lifetime of the lamp (1000 hours) the projector generates an alert message.

  • Page 29: Quick Set Up Adjustments

    2. Press ← or → to shift horizontaly 3. Press ↓or ↑ to shift verticaly 4.5.2 Using the RCU Pointing to the reflective screen 1. Point the front of the RCU to the reflective screen surface. (image 4-4) R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 30: Hardwired Remote Input

    When using the wireless remote control, make sure you are within the effective operating distance (30m, 100ft in a straight line). The remote control unit will not function properly if strong light strikes the sensor window or if there are obstacles between the remote control unit and the projector IR sensor. R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 31: Projector Address

    When the address is set, the projector can be controlled by : • RCU for addresses between 0 and 9. • computer, e.g. IBM PC (or compatible), Apple MAC, etc. for addresses between 1 and 255. R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 32: Displaying And Programming Addresses Into The Rcu

    Use the + button for richer colors. Use the - button for lighter colors. Tint(Hue) Tint is only active for Video and S-Video when using the NTSC 4.43 or NTSC 3.58 system. Use the + button Use the - button. R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 33: Using The Menu

    How to pull down a submenu ? 1. Use → to pull down a submenu How to exit the submenu ? 1. Press BACK to exit a submenu Press MENU to exit the menu R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 34: Using The Dialogboxes

    In some cases an alphanumeric value (file name, ...) has to be entered. Use ↑ or ↓ to scroll through the char- acter values once the input field is activated Following characters can be browsed in this particular order: Decimal scroll list: 0123456789 Signed decimal scroll list: 0123456789- ASCII scrolllist:ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789+-*/&@#.;.abcdefghijklmnopqrstuvwxyz R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 35: Source Selection

    On the screen appears now the selected source. Image 5-1 A Barco logo on the menu indicates the presence of a signal. The 3 first sources (Data on BNC’s 1, Component Video & RG(s)B) refer to the first 5-cable input.

  • Page 36: Composite Video

    5. Use ↑ or ↓ to select one of the different video inputs (image 5-3) 6. Press ENTER to confirm your choice A white bullet indicates the selected video source which now appears on the screen. R5976455 BARCO ULTRA REALITY 7000 30062003...
  • Page 37 The s-video source can also be selected using the numeric digit “4” on the local keypad and the RCU. Pressing digit “4” on the RCU selects the S-Video source selected in the S-Video menu. R5976455 BARCO ULTRA REALITY 7000 30062003...
  • Page 38 5. Source Selection R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 39: General Menu

    To restart the image : press PAUSE, MENU, BACK or LOGO 6.2 Freeze Freezing the image With the Freeze function, the image can be frozen.To restart the image, reuse the Freeze function or press the FREEZE button on the remote. R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 40: Standby Timer

    7. Use ↑ or ↓ to browse to the input field 8. Use ←or→ , the numeric keys on the remote or the keypad to change the countdown setting 9. Press MENU or BACK to exit or to go back to the previous menu R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 41: Identification

    5. Press ENTER to activate the function On the screen appears a textbox. (image 6-7) 6. Press MENU or BACK to exit or to go back to the previous menu Image 6-6 Image 6-7 R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 42: Network Card Reboot

    2. Press → to select the General item 3. Press ↓ to Pull down the General menu 4. Use ↑ or ↓ to select Runtime (image 6-9) 5. Press ENTER A textbox is displayed (image 6-10) Image 6-9 R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 43: History

    3. Press ↓ to Pull down the General menu 4. Use ↑ or ↓ to select History (image 6-11) 5. Press ENTER A textbox is displayed (image 6-12) Image 6-11 Lamp history 0001230 1400 0001222 1300 0001240 Image 6-12 R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 44: Reset Runtime

    Image 6-13 Image 6-14 Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized technician. 6.9 Runtime warning What can be done ? When the lamp has reached a certain predetermined runtime , a warning message will be displayed on the screen. The lamp runtime warning can be set in a range from 30 to 200 hours.

  • Page 45: Lamp Dimming

    6. Use ←or →, the numeric keys on the remote, or the keypad to change the runtime warning setting. Image 6-15 Image 6-16 Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized technician. 6.10 Lamp Dimming What can be done? The lamp can be dimmed via the lamp dimming feature.
  • Page 46 6. General Menu Image 6-17 Dimming 530 W 600 W Image 6-18 A projector starts always with full lamp power. R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 47: Image Menu

    Correct image settings are important for a good image reproduction. The image settings are made through a dialogbox with a scrollbar. Minimal, maximal and actual values are indicated. These settings can also be done directly via the RCU’s dedicated buttons, except for the sharpness. Image 7-1 Image 7-2 R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 48: Contrast

    6. Use ↓ or ↑ to select Tint 7. Press ENTER On the screen appears now a sliderbox 8. Use ←or → , the numeric keys on the remote, or the keypad to change the Tint R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 49: Sharpness

    The aspect ratio setting forces the projector to project an image using a defined aspect ratio • • 16:9 • • Auto The Auto function calculates an aspect ratio based on the information stored in the image files. R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 50: Show Native Resolution

    1600x1200 image centered Table 7-1 Show native resolution = ON in case of a BARCO ULTRA REALITY 7000 projector The Full screen representation function on the other hand forces to use the complete native resolution of the LCD panels, How to enable the “Show native resolution” function? 1.

  • Page 51: Blanking

    (or noise). A ’0’ on the bar scale indicates no blanking. Which blanking adjustments are available ? • top blanking • bottom blanking • left blanking • right blanking R5976455 BARCO ULTRA REALITY 7000 30062003...
  • Page 52 4. Use ↑ or ↓ to select Blanking (image 7-6) 5. Press → to pull down the menu 6. Use ↓ or ↑ to select left/right/up/down 7. Press ENTER A white bullet shows the selection Image 7-6 R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 53: Keystone

    Film : 5400 K • Broadcast : 3200 K These calibrated presets can be selected and will provide optimum color tracking, the projector allows however the setting of a personal color temperature, this is done in custom R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 54: Filmmode Detection

    Follow the instructions on the wizard textbox. (image 7-13) Image 7-12 Image 7-13 7.7 Filmmode detection What can be done ? Some sources like common DVD material are derived from cinema 24 Hz sources (2/2 or 3/2 pull down method). R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 55: Advanced Settings

    6. Use ↓ or ↑ to select Noise reduction 7. Press ENTER On the screen appears now a sliderbox 8. Use ←or → , the numeric keys on the remote, or the keypad to change the Noise reduction setting. R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 56: Input Balance

    7. Image Menu 7.9 Input balance This procedure is reserved to Barco authorized technicians only. 7.10 AGC on Video Automatic Gain Control: allows an automatic amplitude (gain) control of the incoming video signal Enabling/disabling the AGC 1. Press MENU to activate the Toolbar 2.

  • Page 57: Tools Menu

    The PiP mode allows independent settings for each window: • Image settings : contrast, brightness, tint, color,... • Vertical and horizontal shift of each window all over the screen • Resizing of the window • Digital Zoom R5976455 BARCO ULTRA REALITY 7000 30062003...
  • Page 58 These are factory layouts, they can be edited and saved. • Personal layouts Beside the 2 fixed layouts and the 3 factory layouts, one can set 5 additional (personal) layouts. 1. fixed layout 2. factory layouts R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 59: Pip Select

    Sources which are already used are unselectable. If for instance the PiP layout contains a component video then component video will be unselectable. Once added, the window may be altered in several ways to meet particular needs: • repositioning • resizing • changing the order R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 60: Pip Remove Window

    In the lower part of the screen appears a wizard. (image 8-7) The selected window appears surrounded with a white frame, each hit on PiP ADJUST will move the frame along the different windows. Image 8-6 R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 61: Pip Layout

    Use ← or →, the numeric keys on the remote, or the keypad to enter the name and exit with BACK or MENU. If save has been selected, a messagebox is displayed (image 8-10) Image 8-8 Image 8-9 Image 8-10 R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 62: Pip Rename Layout

    2. Press → to select the Tools item 3. Press ↓ to Pull down the Tools menu 4. Use ↑ or ↓ to select PiP layout 5. Press → to pull down the menu R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 63: Pip Adjust

    PiP adjust allows to browse through the windows in the active layout, a white frame indicates the window which has the focus. This way, independent settings (picture settings, ...) are possible for each window. This can also be done by using the dedicated PiP Adjust key on the RCU R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 64: Diagnostics

    1. Press MENU to activate the Toolbar 2. Press → to select the Tools item 3. Press ↓ to Pull down the Tools menu 4. Use ↑ or ↓ to select Diagnostics (image 8-16) R5976455 BARCO ULTRA REALITY 7000 30062003...
  • Page 65 8. Tools Menu 5. Press → to pull down the menu 6. Press ENTER to select I A textbox is displayed Image 8-16 R5976455 BARCO ULTRA REALITY 7000 30062003...
  • Page 66 8. Tools Menu R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 67: Signal Menu

    How to change the background ? 1. Press MENU to activate the Toolbar 2. Press → to select the Signal item 3. Press ↓ to Pull down the Signal menu 4. Use ↑ or ↓ to select Background R5976455 BARCO ULTRA REALITY 7000 30062003...
  • Page 68 9. Signal Menu 5. Press → to pull down the menu 6. Use ↑ or ↓ to select the desired background (image 9-2) 7. Press ENTER Image 9-2 R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 69: Image Files Menu

    6. Use ↑ or ↓ to select the desired file Tip: For more info about the available image files and the specifications, see appendix B 7. Press ENTER The file is loaded and the image is adapted. Image 10-1 R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 70: Auto Image

    6. Use ↑ or ↓ to select the desired file scan method (image 10-3) 7. Press ENTER A textbox showing a progress bar is displayed. (image 10-4) Tip: Press the Cancel button to cancel the operation. R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 71: Edit File

    6. Use ↑ or ↓ to select the desired file Note: If in PiP mode, the cursor is placed by default on the active file which has the focus. 7. Press ENTER A dialogbox is displayed (image 10-6) R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 72: Which Items Can Be Adjusted

    Active horizontal pixels • Horizontal start in pixels • Horizontal period in ns • Active vertical lines • Vertical start in lines Advanced video settings The advanced button enables the advanced settings for a video source. R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 73: Advanced Data Settings

    Both VCO range & Cpmp are set by the image file, changing these settings is only indicated in for special purposes. The input format settings are used to "tell more" about the signals connected on the BNC’s, it completes the information in the source selection menu. It is recommended to use the default values. R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 74: Rename File

    2. Press → to select the Image files item 3. Press ↓ to Pull down the Image files menu 4. Use ↑ or ↓ to select copy (image 10-14) 5. Press ENTER A dialogbox is displayed (image 10-15) R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 75: Delete

    4. Use ↑ or ↓ to select delete (image 10-17) 5. Press ENTER A dialogbox is displayed (image 10-18) 6. Use ↑ or ↓ to select the desired file 7. Press ENTER The selected file is deleted and is removed from the list R5976455 BARCO ULTRA REALITY 7000 30062003...
  • Page 76 10. Image files menu Image 10-17 Image 10-18 R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 77: Display Setup

    3. Press ↓ to Pull down the Display setup menu 4. Use ↑ or ↓ to select Startup screen 5. Press → to pull down the menu 6. Use ↓ or ↑ to select the desired baudrate 7. Press ENTER R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 78: Textbox

    4. Use ↑ or ↓ to select Take screenshot (image 11-1) 5. Press ENTER A dialogbox is displayed. Press yes to confirm. (image 11-2) A textbox shows the evolution of the operation. (image 11-3, image 11-4) Image 11-1 Image 11-2 Image 11-3 R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 79: Menu Bar Position

    3. Press ↓ to Pull down the Display setup menu 4. Use ↑ or ↓ to select Status bar position (image 11-6) 5. Press ENTER 6. Use ↑ or ↓ to position the status bar R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 80: Sliderbox Position

    A sliderbox is displayed. Use the 4 arrow keys to drag the box to the desired position. (image 11-8) Image 11-7 Image 11-8 There is a coarse and a fine adjustment of the position, use ENTER (when sliderbox is displayed) to switch between the two. R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 81: Autoimage Setup

    4. Use ↑ or ↓ to select AutoImage setup (image 11-9) 5. Press ENTER A dialogbox is displayed. (image 11-10) 6. Use the arrow keys to select the desired item and press ENTER to activate or disactivate the item. Image 11-9 Image 11-10 R5976455 BARCO ULTRA REALITY 7000 30062003...
  • Page 82 11. Display setup R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 83: Installation Menu

    3. Press ↓ to Pull down the Installation menu 4. Use ↑ or ↓ to select Lens adjustment (image 12-1) 5. Press ENTER A textbox appears on the screen, follow the instructions. (image 12-2, image 12-3) Image 12-1 R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 84: Projector Address

    3. Press ↓ to Pull down the Installation menu 4. Use ↑ or ↓ to select Projector address (image 12-4) 5. Press ENTER A dialogbox appears on the screen. (image 12-5, image 12-6) Image 12-4 R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 85: Orientation

    5. Press → to pull down the menu 6. Use ↓ or ↑ to select the desired orientation (image 12-9) 7. Press ENTER The projection is adapted and a black bullet shows the active configuration. R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 86: Language

    2. Press → to select the Installation 3. Press ↓ to Pull down the Installation menu 4. Use ↑ or ↓ to select Quick access keys (image 12-10) 5. Press ENTER A textbox appears on the screen. R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 87: Rs232 Baudrate

    4. Use ↑ or ↓ to select RS232 baudrate 5. Press → to pull down the menu (image 12-11) 6. Use ↓ or ↑ to select the desired baudrate 7. Press ENTER Image 12-11 12.7 Network configuration DHCP Dynamic host configuration protocol R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 88: Change Password

    A dialogbox is displayed. (image 12-14) 6. Use ← or → , the numeric keys on the remote , or the keypad to enter and confirm the new password. Each character is displayed as an asterisk. R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 89: Auto File Load

    Image 12-13 Image 12-14 The new password is accepted if the new password and the confirmed password coincide. If the password is forgotten contact a Barco authorized technician. 12.9 Auto file load What can be done ? The Auto file load option allows to create automatically an image file whenever a new source is detected, this file is then loaded and the source can be displayed using the settings of that particular image file.
  • Page 90 12. Installation menu Image 12-15 R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 91: Standard Image Files

    7. Fpix MHz: pixel frequency 8. Ftot : total pixels on one horizontal line. 9. Pact: active pixels on one horizontal line. 10. Ltot: total lines in one field 11. Lact: active lines in one field. R5976455 BARCO ULTRA REALITY 7000 30062003...
  • Page 92 60,000 50,000 78,569 1571 1120 QXGA_60 95,822 239,939 2504 2048 1597 1536 S1152_66 1152x900 66,004 61,846 94,500 1528 1152 S1152_76 1152x900 76,637 71,809 108,000 1504 1152 1600x1280 89,286 200,000 2240 1600 1334 1280 S1600_67 R5976455 BARCO ULTRA REALITY 7000 30062003...
  • Page 93 1344 1280 1041 1024 SXGA2_60 1280x960 59,999 107,998 1800 1280 1000 SXGA2_85 1280x960 85,940 148,505 1728 1280 1011 SXGA50 1280x1024 52,351 88,368 1688 1280 1047 1024 SXGA60v 1280x1024 63,658 110,001 1728 1280 1056 1024 R5976455 BARCO ULTRA REALITY 7000 30062003...
  • Page 94 71,955 58,140 80,000 1376 1024 XGA_75 1024x768 60,024 78,752 1312 1024 XGA_85 1024x768 85,000 68,680 94,500 1376 1024 XGA_EOS 1024x768 63,000 50,000 67,200 1344 1024 XGA75_GS 1024x768 74,534 59,701 79,284 1328 1024 Table A-1 R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 95: Cleaning The Dustfilter

    2. Turn out the 2 fixation screws of both dust filters. (image B-1, image B-2) 3. Clean the dust filter with a dry cloth. 4. Re-insert the dust filter. 5. Secure their position by insertion and tightening 2 fixation screws. Image B-1 Image B-2 R5976455 BARCO ULTRA REALITY 7000 30062003...
  • Page 96 B. Cleaning the Dustfilter R5976455 BARCO ULTRA REALITY 7000 30062003...

  • Page 97: Glossary

    Address installed in the projector to be individually controlled. Video Composite Video is a single video signal that contains luminance, color and synchronization information. NTSC, PAL and SECAM are examples of composite video systems. R5976455 BARCO ULTRA REALITY 7000 30062003...
  • Page 98 Glossary R5976455 BARCO ULTRA REALITY 7000 30062003...
  • Page 99 Revision Sheet Barco nv Intelligent Displays Noordlaan 5, 8520 Kuurne Phone: +32 56.36.82.11, Fax: +32 56.35.86.51 E-mail: presentations.bid@barco.com, Web: www.barco.com From: Date: Please correct the following points in this documentation (R5976455/02): page wrong correct R5976455 B 7000 30062003 ARCO LTRA...

This manual is also suitable for:

Ultra reality 7000

Table of Contents