Vertical Size Adjustment - Barco VISION 701 MULTIMEDIA Owner's Manual

Vertical Size Adjustment

Adjust the vertical size by push-
ing the control disk up or down
until the exact image height is
obtained.
Note :
- if the internal # pattern was
selected, this pattern re-
mains on the screen.
- if the genlocked pattern was
selected, the external
source will be displayed.
Hint :
In order to avoid loss of resolu-
tion in the projected image and
to ensure maximum CRT lon-
gevity, do not use an
exessively small vertical size
setting.
A bar scale and a number indi-
cator (between 0 and 100 )
give a visual indication of the
vertical size adjustment.
7-18
GUIDED ADJUSTMENT MODE
Correct by pushing
the control disk
down.
Correct by pushing
the control disk up.
R5975238A BARCOVISION 701 MULTIMEDIA 200797
V SIZE
70