Barco VISION 701 MULTIMEDIA Owner's Manual page 10

SAFETY INSTRUCTIONS
When installing the projector and screen, care must be taken to avoid exposure to
ambient light directly on the screen. Avoid adverse illumination on the screen from
direct sunlight or fluorescent lighting fixtures.
The use of controlled ambient lighting, such as incandescent spot light or a dimmer,
is recommended for proper room illumination. Where possible, care should also be
taken to ensure that the floors and walls of the room in which the projector is to be
installed are non-reflecting, dark surfaces. Brighter surfaces will tend to reflect and
diffuse the ambient light and hence reduce the contrast of the projected image on the
screen.
R5975238A BARCOVISION 701 MULTIMEDIA 070497
1-7