Selecting Setup Pattern - Barco VISION 701 MULTIMEDIA Owner's Manual

RANDOM ACCESS ADJUSTMENT MODE

Selecting Setup Pattern

If an external source is con-
nected to the projector, the
path selection menu will be
displayed. Push the control
disk up or down to highlight
the desired setup pattern and
then press ENTER.
Genlocked pattern : internally
generated cross hatch pattern,
locked on the external source.
Internal # pattern : internally
generated cross hatch pattern
and locked on internal gener-
ated sync signals. (No exter-
nal source necessary)
If no external source is con-
nected to the projector, the in-
ternal cross hatch pattern menu
will be displayed.
The menus in this manual are
created for an external source,
connected to one of the inputs,
and the 'Genlocked pattern' is
selected.
R5975238A BARCOVISION 701 MULTIMEDIA 200697
Choose
a setup pattern
from below:
SELECTED SOURCE
GENLOCKED PATTERN
INTERNAL # PATTERN
Select with
then <ENTER>
<EXIT> to return
ENTER continues to Random Access Ad-
justment Mode or Internal # Pattern Selec-
tion
EXIT returns to Path Selection
ADJUST returns to operational mode
source 1
or
8-5