Adjustment Mode - Barco VISION 701 MULTIMEDIA Owner's Manual

START UP OF THE ADJUSTMENT MODE

Adjustment mode

All picture geometry and convergence adjustments are made while in the
'Adjustment mode'. Two possible ways to enter the adjustment mode :
a) Using the RCU.
Press the ADJUST key.
The projector displays the path selection menu.
b) Using the local keypad.
Press the ADJUST key.
The projector displays the General
access menu.
Use the control disk to high-
light enter ADJUST and press
ENTER.
menu will be displayed.
R5975238A BARCOVISION 701 MULTIMEDIA 200697
The path selection
ADJUST
STANDBY
GENERAL ACCESS
SHARPNESS
TINT
COLOR
5 6
BRIGHTNESS
3 4
CONTRAST
1 2
Enter ADJUST
Select with ,
or
then <ENTER>.
<EXIT> to return
EXIT
ENTER
6-3