Barco VISION 701 MULTIMEDIA Owner's Manual page 37

CONTROLLING
Use the control disk to highlight the
desired source number. Push the
control disk up or down to move the
cursor up and down, push the con-
trol disk to the left or to the right to
move the cursor to the left and to
the right.
Press ENTER to confirm your se-
lection.
When a valid and available source
is selected, there will be informa-
tion displayed on the screen about
that source. This information in-
cludes :
- Source number
- Horizontal frequency
- Vertical frequency
When the entry is a non valid
source number, a warning appears
on the screen : 'input not avail-
able'.
R5975238A BARCOVISION 701 MULTIMEDIA 200697
GENERAL ACCESS
SHARPNESS
TINT
COLOR
5 6
BRIGHTNESS
3 4
CONTRAST
1 2
Enter ADJUST
Select with ,
or
then <ENTER>.
<EXIT> to return
Source 2
Fh= 15.6 kHz
Fv= 50 Hz
WARNING
input not
available
5-7